Brakes > Disc Brake Systems- SSBC > Standard Front Disc Brake Conversion Kits

Front drum to disc brake conversion kit for cars without power brakes. Cast iron 4-piston calipers w/ 43mm pistons. 11.25" diameter rotor. Bolts to V8 drum brake spindles. Includes DUAL BOWL master cylinder, will not bolt to original booster. Minimum wheel size 14 x 7.

Front drum to disc brake conversion kit for cars without power brakes. Cast iron 4-piston calipers w/ 43mm pistons. 11.25" diameter rotor. Bolts to V8 drum brake spindles. Includes SINGLE BOWL master cylinder, will not bolt to original booster. Minimum wheel size 14 x 7.

Includes everything needed to convert a stock car with drum brakes to 4 piston disc brakes. All kits include calipers which have stainless steel pistons and coated with special stainless steel type paint, stainless steel caliper crossover brake lines, rotors, splash shields, bearings, pads, master cylinder, hoses, and all mounting hardware. For factory equipped 8 cylinder cars spindle replacement is not necessary. Some early cars with 14 inch stock steel rims may require later 14 inch steel or optional styled steel rims. Power brake note: When using power brakes the pedal assembly is specific to power or non-power brake cars. Pedal assembly change is required anytime an original power booster is added or subtracted. Optional finishes available please call for pricing and colors. In other words, if you wish to convert a 1968-1973 you will need to order a pedal to go with your kit. 1965-1967 pedal not needed.